- Factory Workshop Lighting Requirements
- Industrial-Grade Features That Matter
- Mounting Height and Spacing Guidelines
Factory Workshop Lighting Requirements
Factory and workshop lighting must balance three competing demands: high illuminance for precision work, energy efficiency for 24/7 operation, and durability against dust, vibration, and temperature extremes. Kingseng industrial LED high bay fixtures are purpose-built for these environments.
| Zone | Recommended Lux | Fixture Type | CCT |
|---|---|---|---|
| General assembly | 300-500 lux | Linear high bay, 150W | 4000K |
| Precision assembly | 750-1000 lux | Linear high bay, 200W | 5000K |
| Inspection/QC | 1000-1500 lux | High-CRI linear, 200W | 5000K (CRI>90) |
| Warehouse/storage | 150-200 lux | UFO high bay, 100-150W | 4000K |
| Loading dock | 200-300 lux | Linear high bay, 100W | 4000K |
Industrial-Grade Features That Matter
Factory environments demand more than just brightness. Kingseng industrial fixtures include: (1) IP65 sealed housing, prevents dust ingress that degrades LED output over time, (2) 6kV surge protection, essential in factories with heavy motor loads and voltage fluctuations, (3) -30°C to 55°C operating range, for unconditioned factory floors and hot process areas, (4) Aluminum finned heatsink, passive cooling with no fan failure points, (5) Vibration-resistant mounting, tested to ANSI C136.31 for industrial vibration environments.
Mounting Height and Spacing Guidelines
For 20-30ft factory ceilings: 150-200W linear high bay, spaced 15-18ft apart in a grid pattern. For 30-40ft ceilings: 200-300W UFO high bay, spaced 20-25ft apart. Spacing-to-height ratio should not exceed 0.8 for uniform illumination. Kingseng provides free photometric layouts (IES files) for orders over 100 units.